Difference between revisions of "Samba"

From Linuxintro
imported>ThorstenStaerk
imported>ThorstenStaerk
(another lesson learned)
Line 1: Line 1:
 
Samba allows you to access network drives on Windows computers from your Linux computer and to provide network drives for Windows computer on your Linux computer. If your computer accesses a network drive, you are using the Samba client. If you provide a network drive on your computer, you are running the Samba server.
 
Samba allows you to access network drives on Windows computers from your Linux computer and to provide network drives for Windows computer on your Linux computer. If your computer accesses a network drive, you are using the Samba client. If you provide a network drive on your computer, you are running the Samba server.
 +
 +
= Find out what is mountable =
 +
To find out what network shares are provided by a Windows server use the [[command]]
 +
smbclient --user ''windowsuser'' -L ''server''
  
 
= Mounting a network drive =
 
= Mounting a network drive =

Revision as of 10:35, 27 September 2012

Samba allows you to access network drives on Windows computers from your Linux computer and to provide network drives for Windows computer on your Linux computer. If your computer accesses a network drive, you are using the Samba client. If you provide a network drive on your computer, you are running the Samba server.

Find out what is mountable

To find out what network shares are provided by a Windows server use the command

smbclient --user windowsuser -L server

Mounting a network drive

You are on a Linux computer and want to mount a Windows computer's shared drive. To do this, open a console and type

mount -o username=user,password=password //computer/share /mountpoint

Here you replace user by your user name, password by your password, computer by your computer's name, share by your share's name and /mountpoint by your mountpoint, e.g. /mnt/samba. Note that your mountpoint has to be an existing directory. This example has been tested with SUSE Linux Enterprise Server 10 and Windows Enterprise Server 2008 but should work same or similar with any distribution.

Providing a network drive

In this chapter we discuss how to provide a network drive that is accessible for Windows and Linux computers in the network. Make sure /etc/samba/smb.conf contains the following:

[global]
	security = share

[tmp]
	comment = Temporary file space
	path = /tmp
	read only = no
	public = yes

Then open a console and issue

/etc/init.d/smb restart

Then mount the tmp share

mount //localhost/tmp /mnt/smb

If this works, congratulations! Your samba is dancing now (ha, ha, bad joke ;) To make samba startup after a reboot, say

chkconfig smb on

TroubleShooting

If you get

mount error 13 = Permission denied

You may have to add the samba user for the mount. Like this:

smbpasswd -a root

See also