imported>ThorstenStaerk |
imported>ThorstenStaerk |
| Line 1: |
Line 1: |
| − | To find out if a USB stick works, [[open a console]] and enter
| + | #REDIRECT [[usb storage]] |
| − | [[dmesg]] | [[tail]] -f
| |
| − | and insert the stick. You will find some lines like
| |
| − | [44950.907137] usb 2-1.5: new high speed USB device using ehci_hcd and address 4
| |
| − | [44950.995677] usb 2-1.5: New USB device found, idVendor=13fe, idProduct=3123
| |
| − | [44950.995682] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
| |
| − | [44950.995686] usb 2-1.5: Product: STORE N GO
| |
| − | [44950.995689] usb 2-1.5: Manufacturer: Verbatim
| |
| − | [44950.995691] usb 2-1.5: SerialNumber: 078B06E70173
| |
| − | [44950.996463] scsi7 : usb-storage 2-1.5:1.0
| |
| − | [44952.030933] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
| |
| − | [44952.031382] sd 7:0:0:0: Attached scsi generic sg8 type 0
| |
| − | [44952.465358] sd 7:0:0:0: [sdh] 31735808 512-byte logical blocks: (16.2 GB/15.1 GiB)
| |
| − | [44952.466109] sd 7:0:0:0: [sdh] Write Protect is off
| |
| − | [44952.466114] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00
| |
| − | [44952.466118] sd 7:0:0:0: [sdh] Assuming drive cache: write through
| |
| − | [44952.470271] sd 7:0:0:0: [sdh] Assuming drive cache: write through
| |
| − | '''''[44952.470276] sdh: sdh1'''''
| |
| − | [44952.502054] sd 7:0:0:0: [sdh] Assuming drive cache: write through
| |
| − | [44952.502060] sd 7:0:0:0: [sdh] Attached SCSI removable disk
| |
| − | The bold line tells you the stick has been attached as [[device]] /dev/sdh.
| |
| − | | |
| − | To get an overview of all inserted USB devices, use
| |
| − | [[hwinfo]] --usb
| |
| − | | |
| − | To get an overview of all storage devices, use
| |
| − | [[hwinfo]] --block
| |
