imported>ThorstenStaerk |
|
Line 1: |
Line 1: |
− | {| align=right border="0" cellpadding="10" cellspacing="0" style="background-color:#ddddff;"
| + | Real brain power on dipaysl. Thanks for that answer! |
− | |+ align="top" style="background-color:#ccccff;"|<br />'''Tutorial Factbox'''<br /><br />
| |
− | |-
| |
− | | Time to replay
| |
− | | 20 min
| |
− | |-
| |
− | | Example Distro
| |
− | | SUSE Linux 11.1
| |
− | |-
| |
− | | <font color=blue><span title="Can be: Howto/Tutorial, Tip, Troubleshooting, Concept">Type</span>
| |
− | | Howto
| |
− | |}
| |
− | | |
− | This article is about how you can use digital cameras that have a USB connection with Linux. There are two types of digital cameras: [[USB mass storage device class|mass storage cameras]] and [http://en.wikipedia.org/wiki/Picture_Transfer_Protocol PTP] cameras. With mass storage devices you connect the camera via USB and can read the photographs as if the camera was a USB hard disk. With PTP cameras, you need software to read the pictures. On most cameras, you can switch if you want to use them as PTP or mass storage cameras. In both cases, you can pull out the storage chip and use it in e.g. and SD-card-reader which will behave like a USB disk. This article uses SUSE Linux 11.1 as example, but it should work same or similar on every Linux distribution.
| |
− | | |
− | = Choosing a digital camera =
| |
− | * does it have a menu structure that you understand?
| |
− | * what resolution has it (MegaPixel)?
| |
− | * can you use SD cards (many computers have slots for them)?
| |
− | * is it capable to use SDHC cards?
| |
− | * can you charge it using a standard adapter (micro USB)?
| |
− | * do you want it to be watertight?
| |
− | | |
− | Thanks for the a new challenge you have unorevced in your blog post. One thing I would really like to discuss is that FSBO associations are built after a while. By introducing yourself to the owners the first saturday their FSBO can be announced, prior to the masses begin calling on Wednesday, you create a good interconnection. By sending them tools, educational components, free accounts, and forms, you become a great ally. By using a personal interest in them in addition to their scenario, you develop a solid connection that, many times, pays off in the event the owners decide to go with an adviser they know along with trust preferably you. | |
− | | |
− | = Mass storage cameras =
| |
− | Make sure your system log is empty. [[open a console]] and type
| |
− | dmesg -c
| |
− | Now switch on and connect your camera to a USB port. Then type
| |
− | dmesg
| |
− | At the end of dmesg you should see something like
| |
− | usb 8-3: new high speed USB device using ehci_hcd and address 3
| |
− | usb 8-3: configuration #1 chosen from 1 choice
| |
− | scsi5 : SCSI emulation for USB Mass Storage devices
| |
− | usb-storage: device found at 3
| |
− | usb-storage: waiting for device to settle before scanning
| |
− | usb 8-3: New USB device found, idVendor=054c, idProduct=0010
| |
− | usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
| |
− | usb 8-3: Product: Sony DSC
| |
− | usb 8-3: Manufacturer: Sony
| |
− | scsi 5:0:0:0: Direct-Access Sony Sony DSC 6.00 PQ: 0 ANSI: 0 CCS
| |
− | sd 5:0:0:0: [sdc] 1953792 512-byte hardware sectors: (1000MB/954MiB)
| |
− | sd 5:0:0:0: [sdc] Write Protect is off
| |
− | sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00
| |
− | sd 5:0:0:0: [sdc] Assuming drive cache: write through
| |
− | sd 5:0:0:0: [sdc] 1953792 512-byte hardware sectors: (1000MB/954MiB)
| |
− | sd 5:0:0:0: [sdc] Write Protect is off
| |
− | sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00
| |
− | sd 5:0:0:0: [sdc] Assuming drive cache: write through
| |
− | '''''sdc: sdc1'''''
| |
− | sd 5:0:0:0: [sdc] Attached SCSI removable disk
| |
− | sd 5:0:0:0: Attached scsi generic sg4 type 0
| |
− | usb-storage: device scan complete
| |
− | That means your camera's pictures are available on device ''/dev/sdc1''. If you are flooded by dmesg's messages, you can also look at it using
| |
− | # [[hwinfo]] --block --short
| |
− | disk:
| |
− | /dev/sda SAMSUNG HD103UJ
| |
− | /dev/sdb WDC WD3200AAKS-7
| |
− | /dev/sdc Sony DSC
| |
− | partition:
| |
− | /dev/sda1 Partition
| |
− | /dev/sdb1 Partition
| |
− | /dev/sdb2 Partition
| |
− | /dev/sdc1 Partition
| |
− | cdrom:
| |
− | /dev/sr0 HL-DT-ST DVD-ROM GDRH20N
| |
− | /dev/sr1 TSSTcorp DVD+-RW TS-H653B
| |
− | You can now mount ''/dev/sdc1'' to /mnt/camera:
| |
− | sudo mkdir -p /mnt/camera
| |
− | sudo mount ''/dev/sdc1'' /mnt/camera
| |
− | Now you can find your pictures and movies on /mnt/camera.
| |
− | | |
− | = PTP cameras =
| |
− | If you have a PTP USB digital camera, you can get all its pictures transferred with gphoto2. So [[build and install gphoto2]], then [[open a console]] and type
| |
− | mkdir photos
| |
− | cd photos
| |
− | gphoto2 --get-all-files
| |
− | | |
− | = TroubleShooting =
| |
− | | |
− | '''Symptom:''' When trying to mount your camera, you get
| |
− | mount: unknown filesystem type 'vfat'
| |
− | | |
− | '''Reason:''' Your kernel does not have vfat support compiled in nor does it have vfat compiled as a module. The following shows how it should look like:
| |
− | | |
− | # cat /proc/filesystems | grep vfat
| |
− | vfat
| |
− | # lsmod | grep vfat
| |
− | vfat 11752 1
| |
− | fat 53592 1 vfat
| |
− | # zcat /proc/config.gz | grep -i fat
| |
− | # DOS/FAT/NT Filesystems
| |
− | CONFIG_FAT_FS=m
| |
− | CONFIG_VFAT_FS=m
| |
− | CONFIG_FAT_DEFAULT_CODEPAGE=437
| |
− | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
| |
− | | |
− | '''Solution:''' Install a kernel with vfat support, best use the one from your distribution. SUSE Linux 11.1 is known to work.
| |
− | | |
− | = rescue pics from SD card =
| |
− | [http://www.cgsecurity.org/wiki/PhotoRec photorec] is contained in the package "testdisk"
| |