Dd

dd is a utility to create a disk dump by reading every single block on a disk, e.g. your hard drive. However, its architecture is laid out so it can do much more than creating a dump. Here is what dd can do for you:

• manage a disk backup
  • create a backup from a disk to a file
  • restore a backup from a file to a disk
  • clone a harddisk
  • create a disk image and transfer it over the network
• create an iso image of a CD
• rescue a file that contains bad blocks
• analyze your disk by displaying selected blocks
• create your own operating system by dumping your bootloader to the boot sector
• benchmark the throughput of your disks

Disk Backup

Create a backup

Say we have a harddisk /dev/sda that we want to backup entirely (sector-by-sector) to a USB volume /dev/sdb1, mounted on /mnt/sdb1. We call this a dump or an image of /dev/sda. The dump shall be named backup.img. Here is the dd command:

dd if=/dev/sda of=/mnt/sdb1/backup.img

In this command, if stands for input file and of for output file.

Restore a backup

To restore this backup, we boot from a live CD and do the command vice versa. This can overwrite all content on your harddisk, this is the intention.

dd if=/mnt/sdb1/backup.img of=/dev/sda

Clone a harddisk

To clone a disk A to B, both disks need to have the same capacity. It is very convenient for USB disks. Say our USB disk source is called /dev/sdb and the target is called /dev/sdc. Do it like this:

dd if=/dev/sdb of=/dev/sdc

Now if sdc has a bigger capacity, this capacity will be lost because the file system is not aware of it.

Transfer a disk image

To transfer a disk image over the network to a computer named target, use

dd if=/dev/sdb | ssh root@target "(cat >backup.img)"

create an iso image of a CD

To create an iso image of a CD, read it block-by-block and save the blocks to a file:

dd if=/dev/cdrom of=cdimage.iso

create a disk image

To create an empty image of a harddisk, e.g. for qemu virtualization:

dd if=/dev/zero of=harddisk.img bs=516096 seek=6241 count=0

creates a 3GB-Image. For a 6GB-Image, use seek=12482.

rescue a file that contains bad blocks

If your favorite movie or song cannot be played any longer because the file is corrupt, you can use dd to ignore the corrupt part:

dd if=movie.avi of=rescued_movie.avi conv=noerror

analyze your disk

DD is great to learn about your system. To analyze your disk by displaying selected blocks, in this case block 1001 use:

dd if=/dev/sdc1 count=1 skip=1000

Create your own bootloader

To create your own operating system by dumping your bootloader to the boot sector of a bootable disk image use

dd conv=notrunc if=bootloader of=qemu.img

benchmark the throughput of your disks

To benchmark the throughput of your disk /dev/sda1, e.g. for different block sizes, proceed like this:

# dd if=/dev/sda1 of=/dev/null bs=512 count=1000000
1000000+0 records in
1000000+0 records out
512000000 bytes (512 MB) copied, 5.16588 s, 99.1 MB/s
# dd if=/dev/sda1 of=/dev/null bs=4096 count=1000000
1000000+0 records in
1000000+0 records out
4096000000 bytes (4.1 GB) copied, 36.0667 s, 114 MB/s

However, make sure you have read Background:How caching works first otherwise you will be surprised by a mysterious accelleration like this:

# dd if=/dev/sda1 of=/dev/null bs=512 count=1000000
1000000+0 records in
1000000+0 records out
512000000 bytes (512 MB) copied, 5.32254 s, 96.2 MB/s
# dd if=/dev/sda1 of=/dev/null bs=512 count=1000000
1000000+0 records in
1000000+0 records out
512000000 bytes (512 MB) copied, 1.09851 s, 466 MB/s

get the progress

During a long dd run you may want to know the progress. dd will output it for you if it receives a special signal, USR1. So,

• find out the number of SIGUSR

 # kill -l
 1) SIGHUP       2) SIGINT       3) SIGQUIT      4) SIGILL       5) SIGTRAP
 6) SIGABRT      7) SIGBUS       8) SIGFPE       9) SIGKILL     10) SIGUSR1
11) SIGSEGV     12) SIGUSR2     13) SIGPIPE     14) SIGALRM     15) SIGTERM
16) SIGSTKFLT   17) SIGCHLD     18) SIGCONT     19) SIGSTOP     20) SIGTSTP
21) SIGTTIN     22) SIGTTOU     23) SIGURG      24) SIGXCPU     25) SIGXFSZ
26) SIGVTALRM   27) SIGPROF     28) SIGWINCH    29) SIGIO       30) SIGPWR
31) SIGSYS      34) SIGRTMIN    35) SIGRTMIN+1  36) SIGRTMIN+2  37) SIGRTMIN+3
38) SIGRTMIN+4  39) SIGRTMIN+5  40) SIGRTMIN+6  41) SIGRTMIN+7  42) SIGRTMIN+8
43) SIGRTMIN+9  44) SIGRTMIN+10 45) SIGRTMIN+11 46) SIGRTMIN+12 47) SIGRTMIN+13
48) SIGRTMIN+14 49) SIGRTMIN+15 50) SIGRTMAX-14 51) SIGRTMAX-13 52) SIGRTMAX-12
53) SIGRTMAX-11 54) SIGRTMAX-10 55) SIGRTMAX-9  56) SIGRTMAX-8  57) SIGRTMAX-7
58) SIGRTMAX-6  59) SIGRTMAX-5  60) SIGRTMAX-4  61) SIGRTMAX-3  62) SIGRTMAX-2

• send SIGUSR to all dd processes:

killall -10 dd

The output will read like this:

2989696+0 records in
2989696+0 records out
1530724352 bytes (1.5 GB) copied, 583.336 s, 2.6 MB/s