Sound troubleshooting
So you want your Linux system to play sound, but it does not? Follow these steps to analyze and solve the problem:
Contents
The Methodology
If your cables and volume are okay
- Test if your sound card driver and cables are okay; play a test sound:
speaker-test
If you hear a sound
If you hear a sound, your cables and drivers are okay.
If you do not hear a sound
If you do not hear a sound, see if you get an error message.
If you do not get an error message
If you do not get an error message, it can be a driver issue. To find out, delete all sound devices and re-create them:
tweedleburg:~ # rm /dev/dsp* tweedleburg:~ # udevtrigger
Check again with dd if=/dev/urandom of=/dev/dsp. If you still do neither get an error message nor sound, it is most probably a driver issue. Get yourself a USB soundcard and proceed.
If you get an error message
If you get an error message like this:
tweedleburg:~ # dd if=/dev/urandom of=/dev/dsp dd: opening `/dev/dsp': Device or resource busy
You should find out what process blocks your sound card. Do this with the command lsof (list open files):
tweedleburg:~ # lsof | grep dsp mplayer 18251 root 4w CHR 14,35 14320 /dev/dsp2
You see, mplayer is blocking /dev/dsp2, you third soundcard. Now find out what soundcard you are using:
tweedleburg:~ # ll /dev/dsp* lrwxrwxrwx 1 root root 9 Jun 21 10:38 /dev/dsp -> /dev/dsp2 crw-rw---- 1 root audio 14, 19 Jun 21 10:36 /dev/dsp1 crw-rw---- 1 root audio 14, 35 Jun 21 10:36 /dev/dsp2
/dev/dsp points to /dev/dsp2, so the soundcard you are using is blocked by mplayer. So, kill mplayer if you are sure that is what you want:
killall mplayer
Knoppix
When there is no sound under Knoppix try
/etc/init.d/alsa-utils start
strace'ing sound
I called
strace -s 99 speaker-test
verified that I heard sound. I noticed a lot of data was send to the file handle 6:
gettimeofday({1428021206, 3725}, NULL) = 0
write(1, " 0 - Front Left\n", 16 0 - Front Left
) = 16
write(6, "W", 1) = 1
write(4, "x", 1) = 1
futex(0x979b028, FUTEX_UNLOCK_PI_PRIVATE, -1221210112) = 0
gettimeofday({1428021206, 69604}, NULL) = 0
write(6, "W", 1) = 1
clock_gettime(CLOCK_MONOTONIC, {175, 791783767}) = 0
write(6, "W", 1) = 1
clock_gettime(CLOCK_MONOTONIC, {175, 792229634}) = 0
write(6, "W", 1) = 1
clock_gettime(CLOCK_MONOTONIC, {175, 792636529}) = 0
write(6, "W", 1) = 1
gettimeofday({1428021206, 71347}, NULL) = 0
clock_gettime(CLOCK_MONOTONIC, {175, 793286612}) = 0
write(6, "W", 1) = 1
clock_gettime(CLOCK_MONOTONIC, {175, 793657888}) = 0
write(6, "W", 1)
Then I stopped the process using the CTRL_Z key combination. Then I found speaker-test's PID was 3156. Then I went to the file handles of this process:
linux-fpbq:~ # cd /proc/3156/fd linux-fpbq:/proc/3156/fd # ll total 0 lrwx------ 1 root root 64 Apr 2 20:34 0 -> /dev/pts/1 lrwx------ 1 root root 64 Apr 2 20:34 1 -> /dev/pts/1 lrwx------ 1 root root 64 Apr 2 20:33 2 -> /dev/pts/1 lr-x------ 1 root root 64 Apr 2 20:34 3 -> pipe:[19531] l-wx------ 1 root root 64 Apr 2 20:34 4 -> pipe:[19531] lr-x------ 1 root root 64 Apr 2 20:34 5 -> pipe:[19532] l-wx------ 1 root root 64 Apr 2 20:34 6 -> pipe:[19532] lrwx------ 1 root root 64 Apr 2 20:34 7 -> socket:[19537]
Now speaker-test writes into that file handle. Which process reads from it?
linux-fpbq:/proc/3156/fd # lsof -n +c 15 | grep 19532 speaker-test 3156 root 5r FIFO 0,8 0t0 19532 pipe speaker-test 3156 root 6w FIFO 0,8 0t0 19532 pipe threaded-ml 3156 3157 root 5r FIFO 0,8 0t0 19532 pipe threaded-ml 3156 3157 root 6w FIFO 0,8 0t0 19532 pipe
seems to be threaded-ml. Threaded-ml is the same process as speaker-test, just another thread. Also, both are subtasks to strace. Also, strace -p'ing speaker-test only yields futex syscalls. This leads nowhere.
However, running speaker-test and strace -p'ing pulseaudio yields a lot of send syscalls to file descriptor 20. Stopping speaker-test removes this file descriptor. While it runs, the file descriptor looks like this:
lrwx------ 1 root root 64 Apr 2 20:32 20 -> socket:[55006]
and - while speaker-test is running the following can be observed:
# lsof | grep 55006 pulseaudi 2842 root 20u unix 0xf6445040 0t0 55006 /run/user/0/pulse/native alsa-sink 2842 2847 root 20u unix 0xf6445040 0t0 55006 /run/user/0/pulse/native alsa-sour 2842 2848 root 20u unix 0xf6445040 0t0 55006 /run/user/0/pulse/native
Still this just shows how pulseaudio's threads alsa-source and alsa-sink communicate with each other. The solution is brought by the parameter -ff to strace, finally we find file descriptor 39:
[pid 2847] ppoll([{fd=17, events=POLLIN}, {fd=22, events=POLLIN|POLLERR|POLLNVAL}, {fd=18, events=POLLIN}, {fd=39, events=POLLOUT|POLLERR|POLLNVAL}], 4, {1, 810195000}, NULL, 8 <unfinished ...>
and
[pid 2847] ioctl(39, SNDRV_PCM_IOCTL_HWSYNC, 0xb6bd7570) = 0 [pid 2847] ioctl(28, SNDRV_CTL_IOCTL_ELEM_READ or USBDEVFS_IOCTL, 0xb6208e80) = 0
Note that PID 2847 is a thread of pulseaudio. And that file descriptor 39 is
lrwx------ 1 root root 64 Apr 2 21:53 39 -> /dev/snd/pcmC0D0p
strace'ing sound II
I can hear sound on starting
speaker-test
and I can see with strace that speaker-test triggers activity inside the pulseaudio process. But how do they communicate with each other? First of all let's find out all threads of the speaker-test process:
linux-fpbq:~ # ps -A | grep speaker-test 29145 pts/1 00:00:07 speaker-test linux-fpbq:~ # cd /proc/29145/fd linux-fpbq:/proc/29145/fd # ll total 0 lrwx------ 1 root root 64 Apr 4 15:44 0 -> /dev/pts/1 lrwx------ 1 root root 64 Apr 4 15:44 1 -> /dev/pts/1 lrwx------ 1 root root 64 Apr 4 15:44 2 -> /dev/pts/1 lr-x------ 1 root root 64 Apr 4 15:44 3 -> pipe:[114406] l-wx------ 1 root root 64 Apr 4 15:44 4 -> pipe:[114406] lr-x------ 1 root root 64 Apr 4 15:44 5 -> pipe:[114407] l-wx------ 1 root root 64 Apr 4 15:44 6 -> pipe:[114407] lrwx------ 1 root root 64 Apr 4 15:44 7 -> socket:[114414] linux-fpbq:/proc/29145/fd # lsof +c 15 | grep 114414 speaker-test 29145 root 7u unix 0xf5f19040 0t0 114414 socket threaded-ml 29145 29146 root 7u unix 0xf5f19040 0t0 114414 socket
ok, seems a socket that is open to speaker-test is also open to threaded-ml. So threaded-ml is a thread of speaker-test.
Now process 29145 is currently speaker-test and process 2289 is pulseaudio. strace'ing speaker-test with strace -ffp 29145 I find:
[pid 29146] recvmsg(7, {msg_name(0)=NULL, msg_iov(1)=[{"\0\0\0\0\377\377\377\377\0\0\0\20\0\0\0\0@\0\0\0", 20}], msg_controllen=24, {cmsg_len=24, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=2289, uid=0, gid=0}}, msg_flags=0}, 0) = 20
So speaker-test definitely gets messages from process 2289 and it gets them via file descriptor 7:
linux-fpbq:/proc/29145/fd # ll 7 lrwx------ 1 root root 64 Apr 4 15:44 7 -> socket:[114414]
Now strace'ing pulseaudio with the command strace -ffp 2289 I get:
[pid 2289] send(28, "\0\0\0\24\377\377\377\377\0\0\0\0\0\0\0\0\0\0\0\0L\0\0\0=L\377\377\377\377L\0"..., 40, MSG_NOSIGNAL) = 40
In other words, what pulseaudio sends via file descriptor 28 is received by speaker-test via file descriptor 7
linux-fpbq:/proc/2289/fd # ll 28 lrwx------ 1 root root 64 Apr 4 15:13 28 -> socket:[114415]
