Bluetooth
From Linuxintro
Revision as of 15:04, 4 August 2012 by imported>ThorstenStaerk (→Transfer files)
Bluetooth is a good way to establish a wireless connection. Here is how you can do it with Linux.
Contents
SUSE Linux 12.1
All instructions have been tested with SUSE Linux 12.1 but should work same or similar with every combination.
Check your hardware
Your hardware must be compatible, and the correct drivers must be loaded. To check this, open a console:
tweedleburg:~ # hwinfo --bluetooth --short bluetooth: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) tweedleburg:~ # hcitool scan Scanning ... 00:16:4E:62:BE:31 Nokia 6230i
Transfer files
The best possibility to transfer files is to call the program bluetooth-applet. It will show an icon in your systray that looks like this: . Click on it, then select "Set up new device...".
older SUSE Linux distributions
with KDE 3.5
Using KDE 3.5 or older you can point your konqueror to bluetooth:/// and you will be able to use your phone's files just as if they were local.
Debian
This is a Nokia example
- apt-get install bluez-hcidump bluez-pin bluez-utils libbluetooth1 libsdp2
- /etc/init.d/./bluez-utils restart
- hcitool scan
- l2ping 00:11:9F:5E:D8:32
- sdptool browse 00:11:9F:5E:D8:32
- /etc/bluetooth/rfcomm.conf
rfcomm0 { device 00:11:9F:5E:D8:32; channel 9; comment "Nokia 6230"; }
- /etc/init.d/./bluez-utils restart
- rfcomm bind /dev/rfcomm0 00:11:9F:5E:D8:32 9
Future reference
If you still have problems, have a look at the commands
- obexftp
- obexpushd -B