Set up a heartbeat cluster

This article describes an example installation of a heartbeat cluster on SUSE Linux.

Architecture

sense	name	IP	virtual/physical
first cluster node	heartbeat-1	192.168.0.21	virtual
second cluster node	heartbeat-2	192.168.0.22	virtual
iscsi storage	tweedleburg	192.168.0.5	physical
virtual IP address	gothere	192.168.1.1	virtual

Process

• On heartbeat-*, install SLES 10 as per default, but I disable ZMD and the firewall.
• On tweedleburg, install an iscsi storage.
• establish passwordless login between heartbeat-1 and -2.
• adapt /etc/hosts on both nodes so that it contains

192.168.0.21    heartbeat-1.site heartbeat-1
192.168.0.22    heartbeat-2.site heartbeat-2

• configure the cluster on node 1

heartbeat-1:~ # yast2 heartbeat

Choose MD5 as auth method and myauth as password.

• install heartbeat on node 2

heartbeat-1:~ # yast -i heartbeat

• propagate the heartbeat configuration

heartbeat-1:~ # scp /etc/ha.d/ha.cf root@heartbeat-2:/etc/ha.d
heartbeat-1:~ # scp /etc/ha.d/authkeys root@heartbeat-2:/etc/ha.d

• start the cluster

heartbeat-1:~ # /etc/init.d/heartbeat start
heartbeat-2:~ # /etc/init.d/heartbeat start

• set a password for the hacluster admin

heartbeat-1:~ # passwd hacluster

• configure the cluster

heartbeat-1:~ # hb_gui

Log in as hacluster user to heartbeat-1

Shared storage

• build sfex from http://www.linux-ha.org/sfex on both nodes
• set up an iscsi initiator on both nodes, we assume it makes the device /dev/sdb.
• test sfex by locking /dev/sdb

heartbeat-1:~ # /usr/lib64/heartbeat/sfex_init /dev/sdb
heartbeat-1:~ # /usr/lib64/heartbeat/sfex_lock /dev/sdb
acquired lock successfully.
heartbeat-1:~ # /usr/lib64/heartbeat/sfex_stat /dev/sdb
control data:
  magic: 0x01, 0x1f, 0x71, 0x7f
  version: 1
  revision: 3
  blocksize: 512
  numlocks: 1
lock data #1:
  status: lock
  count: 2
  nodename: heartbeat-1
status is LOCKED.

• test the other cluster node realizes the lock:

heartbeat-2:~/sfex-1.3 # /usr/lib64/heartbeat/sfex_stat /dev/sdb
control data:
  magic: 0x01, 0x1f, 0x71, 0x7f
  version: 1
  revision: 3
  blocksize: 512
  numlocks: 1
lock data #1:
  status: lock
  count: 2
  nodename: heartbeat-1
status is UNLOCKED.

Configure cluster resources

In the hb_gui program, you add a new resource group named resource_group. You add the first resource, the sfex device. You add the start, stop and monitor operations to this.