KVM

KVM is the Linux kernel's native virtualization.

Install it

SUSE 11

Networking

You want networking for your virtual machines, so

• start networking configuration

yast2 lan

• delete the configuration of your network card. We call it eth0 in this example.
• create an additional network device, a bridge, using yast2. Assign it your default IP address. Configure it to bridge network traffic for eth0.
• restart networking

/etc/init.d/network restart

KVM Software

• install the KVM software like this:

# yast -i kvm virt-manager
# /etc/init.d/libvirtd start
# chkconfig libvirtd on
# virt-manager

• click on new, continue as adviced

more information

brctl show
brctl addbr br0
brctl addif br0 eth0
route del -net 192.168.0.0 netmask 255.255.255.0 eth0

Reference: http://kbase.redhat.com/faq/docs/DOC-19071

TroubleShooting

The hypervisor is not running

Now you try to create a new virtual machine. When you use Paravirtualization, you get the error message "The hypervisor is not running.". When you try to use "Full virtualization", you get an error

The operating system does not support full virtualization
The CPUs support full virtualization, but it is disabled in the BIOS

To resolve this,

• create a new connection, type "QEMU/KVM"
• reboot your computer
• start virt-manager

create a new virtual machine. You get an error

internal error No <source> 'bridge' attribute specified with <interface type='bridge'/>

To resolve this

• you disable networking

backup

# virsh list --all
# cp -r /var/lib/xen/images/virtual_machine /target